The choice of a home theater system

If the home theater system is only used for listening to music, then you have bookshelf speakers, which are typically up to 15 inches () half-size and are placed on shelves or playing walls.They frequency of 60 Hz (hertz) at 20 Hz

If your system is marked especially for movies, then you should have a column or speakers playing the entire frequency range from 40 Hz to 20 kHz.

For parties you can have the speakers on the ground – is a minimum requirement for 200-250Wloud music such as rock and heavy metal. An important point to bear in mind is the power reserve. This power can be loud and sudden gushes of the game or give additional effects, without distortion. If you music that is more than playing, it will burn the equipment.

During this burst suddenly, it can take up to 40-50W. Normally, a person listens to music and watch movies 5W to 10W. Reserve power is 100W for movies and music. For a large group of 20 personsat a party, it is 200-250W. Another thing to investigate is the PMPO) (Peak Music Power Output. This is the total volume, the system.The maximum system performance in a mobile home theater can PMPO is 100W to 150W. In an open-air stadium would give each speaker a power of 1000 W. Graphic Equalizers are used primarily to improve the output from speakers poor or to strengthen, are the frequencies at the lower levels.

Related posts:

1. Choosing A Home Theatre System If your home entertainment system is used only for...
2. Movie Posters, the natural choice for Home Theater Decor Home theaters are becoming more popular. What was once...
3. Setting Up Your Home Theater System in an apartment or condominium at the end of complaints from neighbors Having lived in an apartment or condominium most of...
4. Home Theater Room Testing – Acoustical Correction and Filtered Noise Testing Home Theater (HT) room noise is often a...
5. Integrate your iPod with a Home Theater System Most people who own iPods have found that this...